Fuel polishing and transfer service Ireland — Britteco specialist filtration equipment on site

Oil Tank Services Ireland

Fuel Polishing &
Transfer Ireland

Professional fuel polishing, filtering and transfer services for homes, farms and businesses across Ireland. Restore contaminated fuel to full usability — or transfer it safely to a new tank or storage.

Fully Certified Engineers
Specialist Filtration Equipment
Nationwide Ireland
Fully Insured
Fuel Restored Not Wasted

About This Service

Restore Your Fuel —
Don't Replace It

Contaminated heating oil or diesel doesn't always need to be disposed of. In many cases, fuel polishing can restore your fuel to full usability — saving you the cost of replacement and disposal.

Britteco's mobile fuel polishing units circulate fuel through a multi-stage filtration system, removing water, sludge, microbial growth (diesel bug) and solid particulates — returning clean, usable fuel directly to your tank.

We also provide fuel transfer services — moving fuel safely between tanks, into approved storage, or to a new tank during replacement. All services are available for domestic, agricultural and commercial clients across all 32 counties.

What fuel polishing removes
Water & emulsified water
Diesel bug & microbial growth
Sludge & sediment
Rust, dirt & solid particles
Asphaltene & wax deposits
Bio-films & fungal growth
Domestic Commercial Agricultural
Get a Free Quote
Fuel polishing before and after results Ireland — contaminated dark fuel restored to clean yellow fuel
Before & After Real results from our work
5µm Filtration
precision
10+ Years
experience

How It Works

Our 4-Step Fuel Polishing Process

From fuel analysis to clean, restored fuel — we handle everything on site with minimal disruption.

1
Free Quote & Assessment
Contact us and we'll discuss your situation. Where possible, we take a fuel sample before the job to assess contamination levels and confirm polishing is the right solution.
2
On-Site Setup
Our mobile polishing unit arrives at your property and connects directly to your tank. No need to drain or remove the tank — the entire process happens in place.
3
Multi-Stage Filtration
Fuel is drawn from the tank and passed through multi-stage filters down to 1 micron, removing water, sludge, diesel bug and solid particles before being returned clean to the tank.
4
Clean Fuel Confirmed
Once complete, the fuel is tested to confirm it meets usability standards. Filter elements are replaced and we leave your site clean with your fuel ready to use.
Most domestic jobs completed within a single visit — no downtime to your heating system

Signs Your Fuel Needs Attention

Is Your Fuel Contaminated?

Fuel stored for more than a few months can begin to degrade. Water enters through condensation, microbial growth follows, and the result is contaminated fuel that damages boilers, generators and engines. Look out for these warning signs.

Dark, discoloured or cloudy fuel Clean heating oil or diesel should be clear to light yellow. Dark brown, black or cloudy fuel is a clear sign of contamination.
Boiler or burner problems Frequent boiler lockouts, blocked filters or poor combustion are often caused by contaminated fuel reaching the burner.
Sludge or sediment visible in tank Black or brown sludge at the bottom of the tank is a sign of microbial activity — the diesel bug. Left untreated, it blocks fuel lines and filters.
Fuel stored for 6+ months without use Long-term stored fuel is particularly vulnerable to water ingress and microbial growth, especially modern low-sulphur and biodiesel blends.
Foul or unusual smell from the tank A sour or sulphurous smell is a tell-tale sign of bacterial activity in the fuel. Don't ignore it — it will only get worse over time.
Generator fuel for standby or emergency power Standby generator fuel can sit for years. Regular polishing ensures it's clean and ready when you actually need it most.
Not sure if your fuel can be saved? Call us on 01 539 2798 — we'll advise you honestly, free of charge.
Fuel filter elements before and after filtration Ireland — heavily contaminated filters vs clean white filters
1µm Filtration
precision
Fuel can often be saved Polishing is cheaper than replacing your entire tank of fuel.

Why Choose Britteco

Ireland's Fuel Polishing & Transfer Specialists

Mobile Polishing Units
Our specialist mobile fuel polishing equipment comes to you — no need to drain your tank or bring it anywhere. We connect on site and restore your fuel in place.
Honest Assessment First
We test your fuel before starting. If it's too severely contaminated to save, we'll tell you — and arrange responsible disposal instead. No wasted call-outs.
Nationwide Coverage
We cover all 32 counties across Ireland — homes, farms, commercial properties and industrial sites. From Dublin to Donegal, Cork to Cavan.
Save Money on Fuel
Fuel polishing typically costs far less than replacing a full tank of contaminated oil. We restore your existing fuel investment rather than disposing of it.
10+
Years industry experience
5µm
Filtration precision achieved
32
Counties covered across Ireland
100%
Fully insured & certified

Service Area

We Cover All of Ireland

Fuel polishing and transfer services available nationwide — Republic and Northern Ireland.

Dublin Cork Galway Limerick Sligo Waterford
Leinster
DublinMeath KildareWicklow WexfordLouth KilkennyLaois OffalyLongford WestmeathCarlow
Munster
CorkLimerick WaterfordKerry TipperaryClare
Connacht
GalwayMayo SligoRoscommon Leitrim
Ulster
DonegalCavan Monaghan

Don't see your county? Get in touch — we cover all of Ireland including Northern Ireland.

Call 01 539 2798

Frequently Asked Questions

Fuel Polishing & Transfer — Common Questions

Fuel polishing is a multi-stage mechanical filtration process that removes water, sludge, microbial contamination (diesel bug) and solid particles from stored fuel. The fuel is drawn from the tank, passed through increasingly fine filters down to 1 micron, and returned clean to the same tank — without any need to drain or remove it.

The diesel bug is the collective term for microbial contamination — bacteria, yeast, mould and bio-films that grow at the water-fuel interface in storage tanks. Modern low-sulphur diesel and biodiesel blends are particularly vulnerable. If left untreated, the diesel bug produces acids that corrode tanks and causes sludge that blocks filters, fuel lines and injectors — leading to boiler or engine failure.

Not always. We assess your fuel before starting — if the contamination is too severe, polishing may not be cost-effective and we'll recommend responsible disposal instead. In most cases, however, polishing is the right solution and significantly cheaper than replacing your entire tank of fuel.

The cost depends on the volume of fuel, the level of contamination and your location. We provide a free, no-obligation quote before any work begins. Call us on 01 539 2798 for a quick estimate — in most cases, polishing costs significantly less than replacing the fuel.

No. Our mobile polishing units connect directly to your existing tank. The fuel is circulated through our filtration system and returned clean to the same tank — there is no need to drain, remove or replace the tank. Your heating system can usually continue operating with minimal disruption.

We work with all common fuel types used in Ireland — including heating oil (kerosene / 28-second oil), agricultural diesel, gas oil, commercial diesel, biodiesel blends and generator diesel. We also handle fuel transfer for all these types — between tanks, into storage containers, or to a new tank during replacement.

For domestic heating oil tanks, polishing is usually only needed when a problem becomes apparent. For standby generators and emergency power systems, annual or bi-annual polishing is recommended — the fuel can sit unused for years, making regular maintenance essential to ensure reliability when it's needed.

We provide fuel polishing and transfer services across all 32 counties in Ireland — including Dublin, Cork, Galway, Limerick, Waterford, Meath, Kildare, Wicklow, Kerry, Donegal and all surrounding areas. Not sure? Give us a call and we'll confirm.

Get In Touch

Think Your Fuel Might Be Contaminated?

Don't replace it until you've spoken to us. Britteco's certified engineers cover all of Ireland — we'll assess your fuel honestly and advise the most cost-effective solution.

Free quote — no obligation
Fuel assessed before any work starts
Mobile units — we come to you
All fuel types & tank sizes
Nationwide Ireland coverage
Request a Free Quote
Fill in our online form or call us directly — we respond quickly and always give honest advice.
Request a Quote Online Call 01 539 2798
Fast Response
No Obligation
Honest Advice
Scroll to Top